The Floor Standing Shaking Incubator by Jeiotech is engineered for high-performance research in modern laboratories. Supplied by Apex Scientific in South Africa, this advanced incubator offers precise temperature regulation and powerful shaking capabilities, making it a reliable solution for a variety of laboratory applications.
Temperature Control
This incubator supports a wide temperature range:
- ISF-7100 / 7200: Ambient +5°C to 80°C
- ISF-7100R / 7200R: Ambient -20°C to 80°C
Thanks to microprocessor PID control, the system ensures accurate temperature performance. With three-point calibration and automatic tuning, you get consistently reliable results.
High Shaking Speed
Achieve shaking speeds from 30 to 500 rpm. The incubator’s orbital shaking motion—25.4 mm for ISF-7100/R and 50.8 mm for ISF-7200/R—ensures thorough mixing, even under high-volume workloads.
Enhanced Performance
The unit features a Direct Drive (DD) brushless motor and triple cam system, offering maintenance-free operation with minimal noise. High torque and smooth rotation improve efficiency, while smooth acceleration and deceleration prevent sample spills.
Uniform Temperature Distribution
A high-velocity fan ensures even temperature distribution and rapid recovery after door openings. The air-tight silicone seal and lockable door provide excellent insulation and sample protection.
Safety Features
Multiple safety mechanisms protect your experiments:
- Automatic restart after power interruptions
- Alarms for temperature and shaking speed deviations
- Over-current protection
- Triple-layered temperature safety:
- High/Low deviation alarms
- Electronic temperature limiter
- Mechanical over-temperature limiter
- CFC-free refrigerants (ISF-7100R / 7200R models)
- Audible and visual door-open alarms
For further guidance, read our article,
Shaking Incubators: The Ultimate Guide to Choosing the Right Laboratory Equipment for Your Needs. Visit our
Insights page for more expert articles or explore our full
product range to find the best solutions for your lab.
Universal platforms / Flask clamps / Funnel clamps
Universal platforms provide flexibility for mixing assortments of test tubes and glassware of varying sizes on a single platform. Various clamps for Erlenmeyer flasks and separatory funnels are available.
| Description | ISF-7100/R
ISF-7200/R |
| Cat. No. | Universal platform | AAA23503-V3 |
| – | Flask clamps
(Stainless steel) | Erlenmeyer flask size | Max. mountable flask clamps |
| AAA23550 | for 50 mL | 88 |
| AAA23551 | for 100 mL | 68 |
| AAA23552 | for 250 mL | 39 |
| AAA23556 | for 300 mL | 39 |
| AAA23553 | for 500 mL | 28 |
| AAA23554 | for 1L | 18 |
| AAA23555 | for 2L | 11 |
| AAA23557 | for 2.8L | 8 |
| AAA23558 | for 4L | 6 |
| AAA23559 | for 6L | 5 |
| – | Flask clamps
(plastic) 1) | Erlenmeyer flask size | |
| AAA30570 | for 50 mL | 88 |
| AAA30571 | for 100 ~ 125 mL | 48 |
| AAA30572 | for 200 mL | 35 |
| AAA30573 | for 250 mL | 35 |
| AAA30574 | for 300 mL | 35 |
| AAA30575 | for 500 mL 2) | 24 |
| AAA30576 | for 1L 2) | 12 |
| AAA30577 | for 2L 2) | 8 |
| – | Funnel clamps | separatory funnel size | |
| AAA23562 | for 250 mL | 15 |
| AAA23563 | for 500 mL | 10 |
| AAA23564 | for 1L | 7 |
| AAA23565 | for 2L | 5 |
※ Above accessories need to be mounted on a universal platform which is sold separately.
1) In the case of plastic flask clamps mounting, deformation may occur at temperatures over 40°C. Stainless steel flask clamps are recommended when using over 40°C and high temperature environment.
2) Possible to use under 300 rpm
Dedicated platforms
When using a single flask size only, the dedicated platforms with pre-installed clamps provide maximum capacity. 250mL and 500mL clamps are standard but other sizes can be available.
| Description | ISF-7100/R
ISF-7200/R |
| Universal platform &250mL flask clamps | AAA23634 |
| No. of flask clamps | 39 |
| Universal platform &500mL flask clamps | AAA23635 |
| No. of flask clamps | 28 |
* A dedicated platform is sold with setting each max. mountable amount of flask clamps on.
Test tube racks
Easy to release and mount racks made of durable stainless steel with adjustable angle and tube height support. Test tube racks are used with an optional universal platform.
| Description | ISF-7100/R
ISF-7200/R |
| Cat.No. | Universal platform | AAA23053-V3 |
| – | Test tube size | Mountable capacity of rack* |
| AAA23581 | for 86 test tubes, Ø8mm / Ø0.3˝ | 7 |
| AAA23582 | for 86 test tubes, Ø10mm / Ø0.4˝ |
| AAA23583 | for 58 test tubes, Ø12mm / Ø0.5˝ |
| AAA23584 | for 58 test tubes, Ø14mm / Ø0.6˝ |
| AAA23585 | for 32 test tubes, Ø17mm / Ø0.7 |
| AAA23586 | for 19 test tubes, Ø25mm / Ø1.0˝ |
| AAA23587 | for 10 test tubes, Ø30mm / Ø1.2˝ |
| AAA23594 | for 10 test tubes, Ø35mm / Ø1.4˝ |
| AAA23593 | for 4 test tubes, Ø50mm / Ø1.9˝ |
* No declination
※ We can manufacture other size of test tube racks to meet your specific requirements. Contact us for details.
Microplate holders
Available in three styles: tower type, flat type (small and large), and single type. Tower type holder is for 10 standard or deep well plates. Large flat holder is for 4 standard or deep well plates. Small flat holder is for 3 standard or deep well plates. Single type holder is for 1 standard or deep well plate. (standard well plates’ height: 14.7mm)
| Description | ISF-7100/R
ISF-7200/R |
| Cat.No. | Universal platform | AAA23053-V3 |
| – | Microplate holder type | Max. mountable microplate holders |
| AAA23654 | Single | 25 |
| AAA23651 | Tower | 21 |
| AAA23652 | Flat A (large) | 4 |
| AAA23653 | Flat B (small) | 6 |
* Microplate holders need to be mounted on an universal platform which is sold separately.
Rubber mats
Designed for low-speed applications, non-skid rubber mats allow quick addition or removal of flasks, plates or tubes.
| Description | ISF-7100/R
ISF-7200/R |
| Cat. No | AAA23534 |
Spring wire racks
Ideal for holding a wide variety of tubes, flasks, and other glassware. All components are made of stainless steel.
| Description | ISF-7100/R
ISF-7200/R |
| Cat. No. | AAA23514 |
| – | |
| for 50 mL | 45 |
| for 100 mL | 28 |
| for 250 mL | 18 |
| for 300 mL | 18 |
| for 500 mL | 15 |
| for 1L | 10 |
| for 2L | 6 |
| for 2.8L | 4 |
Universal attachments (utility carriers)
Several adjustable clamping bars for quickly securing a variety of glassware or tubes on non-skid rubber mats. Suitable for flat-bottomed flasks of various sizes.
| Description | ISF-7100/R
ISF-7200/R |
| Cat. No. | AAA23505 |
Lab sticker
An alternative method for securing vessels to a shaker platform. Ideal for containers such as bottles and dishes that cannot be held on the universal platform with conventional flask clamps. For safe operation, gradual RPM increase is recommended.
| Cat. No. | Description (W×D×H) (mm / inch) |
| AAA30551 | 200×200×5 / 7.9×7.9×0.2 |
Gateway
Establish Jeio Tech Network by Gateway. No computer use is required at all. Remote monitoring of operating status through a mobile phone is simply available when you place a Gateway in your laboratory. Maximum 4 units can be connected to Gateway by RS-232 cable.
| Cat. No. | Description |
| AAHQ1011K | Gateway (2.4GHz, 100~240V, 50/60Hz) |
