STRIKE 20 – Large-Capacity Rotary Evaporator
Strike 20 has both industrial and laboratory rotary evaporation features. It meets all the process needs by using Borosilicate glass and PTFE permitting aggressive substances treatment. The plant allows for evaporation of volatile components (lowboiling) so as to separate them from the residual ones (high-boiling) thanks to the difference of their boiling points. Easy and totally safe startup, check and stop procedures of the process: Strike 20 is provided with a transparent protection shield for the evaporation flask and the thermostatic bath.
Heating Bath
The heating bath is lifted by means of a hydraulic system which, in case of Power failure, goes automatically down to avoid fluid overheating.
Sealing System
A great feature of Strike 20 is its sealing system made of self-lubricating material which allows a perfect vacuum-tight. This sealing system does not require any maintenance.
Pressure And Temperature
Strike 20 runs under atmospheric pressure conditions or vacuum. It guarantees a perfect vacuum tight up to 5 mbar. The perfect sealing up to 5 mbar allows for reduced process time due to low evaporation temperature of the fluid. The thermostatic bath can run both with water and oil allowing to reach 180℃
maximum temperature; it also permits evaporation of any solvent under atmospheric pressure conditions. The heating bath is supplied with two 3KW electric heaters.
Measurement, Visual Display And Recording Of The Following Parameters:
- Bath pre-set and real temperature
- Vapor pre-set and real temperature
- Pre-set and real rotation speed
- Pre-set and real vacuum reading and setting
DISPLAY
The process operating parameters can be set and monitored on a 7″ touch-screen display.
Measurement, display and data recording of the following Parameters:
- Set and actual temperature value of the bath
- Set and actual vapour temperature value
- Set and actual rotation speed value of the evaporation flask
- Set and actual vacuum value (vacuum controller included as standard)
Applications
- Distillation(continuous and discontinuous)
- Solvent recycling
- Reflux process reactions
- Component drying
- Fine chemical synthesis
- Crystallization
- Extractions
- Purification
- R&D studies
- Scale-down processes
Industries
- Pharmaceutical
- Chemical
- Cosmetic
- Herb extraction
- Food
- Research
- Petrochemical
How to order
| Order No. | Specification |
| SQFU079738 | STRIKE 20 descending glassware, 20 lt evaporating flask, 2×6 Lt collecting flasks |
Technical Features
| Heating bath | |
| Working range ℃ | ambient … 150 |
| Accuracy ℃ | +/- 2 |
| Resolution ℃ | 0.1 |
| Set point | YES (1℃ step) |
| Type of control | PID |
| Maximum oscillation during checkout ℃ | +/- 3 |
| Power resistor KW | 3 |
| Heater Power density | ≤3W/cm2 |
| Over-temperature protection | YES |
| Temperature sensor | PT100 |
| Filling level | Manual |
| Vapour temperature | |
| Working range ℃ | ambient … 150 |
| Accuracy ℃ | +/- 2 |
| Resolution ℃ | 0.1 |
| Temperature sensor | PT100 |
| Rotation | |
| Working range Rpm | 10-150 |
| Accuracy Rpm | +/- 2 |
| Rotation speed reading | YES |
| Resolution Rpm | 1 |
| Vacuum control | |
| Working range mbar | 8~atmospheric |
| Accuracy mbar | ±5mbar |
| Resolution mbar | 1 |
| Absolute vacuum reading | √ |
| Display | Digital |
| Vacuum setting | √ |
| Lift system | |
| On/off | √ |
| Electric | √ |
| Interface | |
| Export data | √ |
| Remote control | √ |
| Alarms and controls | |
| Heating bath overheating | √ |
| Bath temperature exceeding set point | √ |
| Soft start rotation | √ |
| Rotation speed monitoring | √ |
| Safety status (rotation, lifting, heating=off) | √ |
| Evaporation flask protection | √ |
| Glassware | |
| 20 lt evaporation flask | √ |
| 10 lt evaporation flask | √ |
| 6 lt evaporation flask | √ |
| Collecting flasks: 2×6 lt or 1x10lt | √ |
| Glassware configuration | Descending, reflux, customized |
| General features | |
| Cooler exchange surface (mq) | 0.5 |
| Over-pressure protection | √ |
| Protection with Rupture disc | √ |
| Quick closing | √ |
| Dimensions (WxDxH mm) | 1240x580x2060 |
| Power supply | 230V, 3.4 kW |
| Weight | 150Kg |
| Vapours cycle maximum temperature | √ |
| Vapours cycle minimum temperature | √ |
| Vapours cycle Temp range | √ |
| Receipt/methods in memory | √ |
| Recipes customization | √ |
| Data acquisition on PC | √ |
| Remote Control | √ |
| Bath lowering in case of alarm | √ |
| Optional accessories | |
| Plastic coated glassware | √ |
| Evaporation flask protection shield | √ |
