- Microprocessor PID control ensuring consistent shaking motion and precision accuracy.
- Wide speed range from 150 to 1500 rpm (block dependent)
- Automatic temperature calibration.
- Bright VFD display with responsive touch buttons.
- Memory function of programs allowing relevant parameters (such as temp., rpm, time) of each program step to be stored.
– Up to 10 programs allowed for memory storage.
– Up to 10 steps allowed for each program.
– Interval mix function(continuous switching between shaking and phasing)
- Advanced dual wait on/off timer modes.
– User can set timer to starts immediately after the timer setting or only after reaching the set temp.
- Optimal heat transfer is achieved by the tight coupling design of the main body and the corrosion-resistant anodized aluminum blocks.
- Self-diagnostic function identifying errors.
- Its polypropylene main body is highly chemical-resistant and easy-to-clean.
- Low-profile design with rubber feet for minimal vibration and noise.
- Over-current protection.
|Control||PID feedback control|
|Temperature||Range(℃/℉)||Amb. +5 to 100 / 41 to 212|
|Fluctuation at 80℃(±℃/℉)||0.3 / 0.54|
|Variation at 80℃(±℃/℉)||0.7 / 1.26|
|Safety||Over temp.||Heating plate|
|Over current||Current limit protection|
|Shaking system(WxDxH)||Motion type||Orbital|
|Speed range(rpm)||96-well tube block||150 to 1500|
|0.5㎖tube block||150 to 1000|
|1.5㎖tube block||150 to 1000|
|15㎖tube block||150 to 900|
|Ø12 tube block||150 to 850|
|Ø13 tube block||150 to 850|
|50㎖tube block||150 to 800|
|Orbit size(mm / inch, dia.)||2 / 0.08|
|Dimension(WxDxH)||Body1)(mm/inch)||249 x 325 x 120 / 9.8 x 12.8 x 4.7|
|Net weight(Kg / lbs)||8.3 / 18.3|
※ Permissible environmental conditions: temperature (5-40°C) and relative humidity (up to 80%).
1) Main body dimension without accessories.
|Cat. No.||Description||Max. mountable tube|
|AAAJ4504||96-well Tube block with cover||0.2ml x 96 holes (micro tube)|
|AAAJ4501||0.5ml Tube block with cover||0.5ml x 48 holes (micro tube)|
|AAAJ4502||1.5/2.0ml Tube block with cover||1.5ml /2.0 ml x 24 holes (micro tube)|
|AAAJ4505||15ml Tube block with cover||15ml x 15holes (centrifuge tube)|
|AAAJ4503||50ml Tube block with cover||50ml x 6 holes (centrifuge tube)|
|AAAJ4506||Ø12 Tube block with cover||Ø12 x 24holes|
|AAAJ4507||Ø13 Tube block with cover||Ø13 x 24holes|