The Safetybox® line for compressed gases is designed for the storage of compressed gas cylinders. The models of this line are certified in compliance with EN standards 14470-2, EN16121, EN16122, and have fire resistance class G30- 30 minutes and G60- 60 minutes. It is crucial for the gas cylinders to be stored safely, therefore they must not be exposed to the direct action of sun rays, heat sources or in environments where the temperature may reach or exceed 50°C. Furthermore, they must be protected from humidity and corrosive agents, which could compromise the protection of the valve and damage the cylinder.
Please note that, for safety reasons, it is forbidden to store gases that are not compatible with each other: fuels and oxidisers must be stored separately. Safetybox® for compressed gases are equipped with safety valves that assure natural ventilation and air recirculation inside the cabinet, and which will close automatically in the event of a fire. In the same condition, the intumescent seals will expand and seal the cabinet.
The hinges are spark-proof with full opening. The doors have a key lock with cylinder lock, easy to replace in case of lost keys. These cabinets can be connected to a motor, which must always be active and suitable for aspirating the vapours emitted by the gas cylinders, and to an activated charcoal filter. The Safetybox® for compressed gases are equipped with brackets for anchoring the cylinders, and a metal ramp to facilitate the placement of the cylinders inside the cabinet. These models are designed for gas systems, and have space available for switches and distribution boxes. Containers for small cylinders are available as accessories on request.
The “Cylinder Storage” modular system is the solution for outdoor storage of compressed gas cylinders. The SD Cylinder Storage units consist of folded and welded steel panels onto girders, and are complete with adjustable feet for fixing to the ground on a concrete base. The Cylinder Storage units, being modular systems, enable the storage of fuels separately from combustion agents, gases that cannot be stored together. Cylinder Storage units are supplied disassembled, with assembly kit and instructions. Safetybox® cabinets and Cylinder Storage units are covered by Product Liability Insurance, which will reimburse any damage to persons or property caused by construction faults.
Weight and Dimensions
- External Dimensions (WxDxH): 1300x600x2000 mm
- Internal Dimensions (WxDxH): 1142/1080×454/422×1781 mm
- Weight: 360 Kg
- Total Volume: ~1088 lt
Technical Specifications
- Fire test carried out in accredited laboratories according to EN 1363-1.
- Completely produced in pickled steel, 10/10 mm thickness, painted with epoxy acid-proof powders and passage through thermic tunnel at 200° C. Thickness of painting from a minimum of 60μm (micron) to a maximum of 250μm (micron) as per UNI EN ISO 9001 procedure.
- External monolithic construction completely sealed. New building method with double cases, internal and external.
- New fireproof insulation made of highly fire resistant material, completely ecological.
- Internal body panels made of anti-scratch material, resistant to corrosive products.
- Inflatable trimming 8 + 6 cm (DIN 4102), that swells in case of fire, isolating the inside of the cabinet from the outside.
- Extra inflatable trimming with protection against “Cold and Hot fumes” and dusts.
- Wing doors.
- Natural internal ventilation system for vapours, equipped with two certified security valves for air recycling with automatic closure at 70 ± 10° C. The valves are positioned at the top and at the bottom of the rear wall of the cabinet in order to grant the release of substances, as per normative. External connection collar Ø 100 mm.
- Predisposed for piping passage.
- Space available for the gas adaptor fittings and the main gas flow command panel.
- 4 gas cylinder brackets with locking chains.
- Rolling ramp to enable an easy placement of the cylinders in the cabinet.
- Possibility to install safety device to detect gas leakages.
- Anti-spark hinges.
- Locking system with key and cylinder lock.
- “No smoking” and “Fire” warning stickers on the door (as per European Norms DIN 4844 and ISO 3864).
- Grounding connection to discharge build-up of static electricity.
- Leveling feet for balance.
- Lifetime warranty “RC PRODOTTI”: it covers any injury to persons and objects.
- Usage and maintenance manual.
- Packaging with “Tipping over system®” device.