Freeze dryers of this series are designed for laboratory or product development. Depending on the size of the unit, the free-standing units have an ice capacity of 5 to 40 kg and a footprint of up to 2.7 m². These units are equipped as standard with a vacuum valve for regulating the vacuum and a separating valve between the drying chamber and the condenser. In relation to the footprint, these units are characterized by a compact design. The cladding is made entirely of stainless steel and is therefore resistant to all commercially available disinfectants
Features
- Rectangular drying chamber
- Completely stainless steel
- 20 free definable drying programmes
- Additional capacitive vacuum sensor (optional)
- CIP (cleaning in place) – Spray nozzles mounted in the chamber and condenser ensure intensive cleaning.
- GMP-FDA compliant – Taking the guidelines into account, the systems meet the highest demands for production in compliance with clean room standards. The exact requirements are defined and implemented together with you
- Liquid-tempered shelves made of stainless steel – For an even and rapid temperature distribution, the shelves are flooded with brine oil.
- Closure device for vials – The shelves can be automatically moved together after the drying process to seal vials under vacuum conditions. The optimal preservation.
- Air or water-cooled refrigeration system – Depending on the installation site, we can design the refrigeration systems to be air-cooled or water-cooled.
- Wall mounting (gas-tight) – The front of the unit is installed gas-tight in a wall. This allows the service area to be separated from the production area.
- Oil-sealed and oil-free vacuum pump – If organic solvents are present, it may be useful to use an oil-free vacuum pump.
- Insulator- Glovebox coupling – The units can be connected to insulators via a connecting flange. Special designs are also possible.
- VerschControl systems, SCADA visualisation – We offer a variety of different visualization and documentation systems.
- EX-protection version ATEX,solvent discharge – If explosive gas mixtures are present, the systems can be equipped with explosion protection.
Technical Specifications
| Sublimator 5 | ||
| Drying chamber dimensions (W x H x D) |
350 x 408 x 547 mm | |
| Condenser capacity | 5kg / 24h, max. 6kg | |
| Condensor temperature | -50 oder -80°C | |
| Shelf temperature | -40…+60°C oder -60…+60°C | |
| System dimensions (W x H x D) | 970 x 1700 x 750 mm | |
| Shelf type | Tray drying | Vial drying |
| Shelf size | 200 x 450 mm | 200 x 450 mm |
| Shelf configuration (Number + radiation panel) / Shelves / distance between shelves | 2+1 / 0,18 m² / 130 mm 3+1 / 0,27 m² / 90 mm 4+1 / 0,36 m² / 58 mm 5+1 / 0,45 m² / 44 mm |
2+1 / 0,18 m² / 130 mm 3+1 / 0,27 m² / 90 mm 4+1 / 0,36 m² / 58 mm |
Footprint configuration for tray and vial drying
| Footprint configuration for tray drying | |
| Footprint – tray drying [mm] | 200 x 450 |
| Footprint configuration (number+radiation panel) / footprint [m²] Footprint spacing [mm] | 2+1 / 0,18m² 130mm 3+1 / 0,27m² 90mm 4+1 / 0,36m² 58mm 5+1 / 0,45m² 44mm |
| Footprint configuration for vial drying | |
| Footprint – Vial drying [mm] | 200 x 450 |
| Footprint configuration (number+radiation panel) / footprint [m²] Footprint spacing [mm] | 2+1 / 0,18m² 130mm 3+1 / 0,27m² 90mm 4+1/ 0,36m² 58mm |
